E-CTF type |
E-CTF Laboratory Name |
E-CTF Address |
E-CTF Country |
Standards Covered |
Registration date |
Latest Revision date |
Report Ref. |
E-CTF-2 |
3F FILIPPI S.p.A. (PROVE E COLLAUDI) |
Via del Savena, 28
IT-40065 Pianoro
Bologna (BO) |
Italy |
[LITE]
EN IEC 60598-1:2021 + A11:2022 (All clauses except 4.4.4, 4.4.5, 4.11.6, 4.13.6, 4.14.3, 4.18.2 / Annex F, 4.20, 4.24 / Annex P, 4.26, 4.28, 4.34, 4.35, 8.2.7, 9.2.10, 9.2.11, 9.3.1, 12.5.1e) Annex C Fig. C3, 12.7.2, 13.2.1, 13.3.1, 13.3.2, 13.4.1); EN IEC 60598-2-1:2021; EN 60598-2-2:2012; EN 60598-2-4:2018; EN 60598-2-22:2014 + A1:2020 (All clauses except 22.17.5, Annex C, 22.18, 22.20 [Type of operation: centrally supplied emergency luminaires only]); EN IEC 60598-2-22:2022 (All clauses except 22.17.5, Annex C, 22.18, 22.20 [Type of operation: centrally supplied emergency luminaires only]); EN 60598-2-24:2013; EN IEC 62031:2020 + A11:2021 (All clauses except 10, 12.1, 16, 17, 18, 20, 21, Annex D)
[EMC]
EN IEC 55015:2019 + A11:2020 (All clauses except: - Insertion loss measurement - Radiated disturbance measurements in semi-anechoic chamber (frequency range 30 MHz to 300 MHz covered by independent method – CDNE-method) (# 9) - Conical metal housing for single capped lamps. Electrical power supply interface disturbance measurements.); EN IEC 61547:2023 (All clauses except: - Continuous radiated radio frequency disturbance (# 5.3) - Power frequency magnetic fields (# 5.4) - Continuous radio frequency disturbance (# 5.6)); EN IEC 61000-3-2:2019 + A1:2021; EN 61000-3-3:2013 + A1:2019 + A2:2021 |
2007-03-06 |
2024-03-06 |
IMQ-078/E-CTF2 Issue No: 3 |
E-CTF-2 |
A.A.G. STUCCHI S.r.l. unico socio [Prod. Cat.: INST - LITE] |
Via IV Novembre, 30/32
IT-23854 Olginate
Lecco (LC) |
Italy |
[INST]
EN 60998-1:2004 (All clauses except 12.3); EN 60998-2-1:2004 (All clauses except 12.3); EN 60998-2-2:2004 (All clauses except 12.3); EN 61984:2009 (All clauses except 7.3.7, 7.3.9, 7.3.10, 7.3.13, 7.3.14, 7.4.2)
[LITE]
EN 60598-1:2015 + A1:2018 (All clauses except 4.20, 4.24 / Annex P, 4.28, 9.2.1, 9.2.2, 9.2.3, 9.2.4, 9.2.5, 9.2.6, 9.2.7, 9.3); EN IEC 60598-1:2021 + A11:2022 (All clauses except 4.13, 4.20, 4.24 / Annex P, 4.28, 4.34, 4.35, 9.2.1, 9.2.2, 9.2.3, 9.2.4, 9.2.5, 9.2.6, 9.2.7, 9.2.8, 9.2.9, 9.2.10, 9.2.11, 9.3); EN 60400:2017 + A1:2021 (All clauses except 10.2 (only for soldering lugs)); EN 60838-1:2016 + A1:2017 + A11:2021 + A2:2021 (All clauses except 8.2 (only for soldering lugs)); EN 60570:2003 + A1:2017 + A2:2020 (All clauses except 14) |
2006-11-23 |
2023-12-14 |
IMQ-071/E-CTF2 Issue No: 1 |
E-CTF-2 |
AB PLAST S.r.l. |
Via Fura, 38/A
IT - 25125 Brescia (BS) |
Italy |
[INST]
EN 60669-1:2018 (All clauses except 15.2.2 (for degrees of protection higher than IPX4), 15.2.3 (for degree of protection higher than IPX6)) |
2021-11-25 |
2022-11-25 |
IMQ-402/E-CTF2 Issue No: 1 |
E-CTF-2 |
ABB S.p.A. (LABORATORIO PROVE ABB) [Prod. Cat.: EMC] |
Viale dell'Industria, 18
IT-20010 Vittuone
Milano (MI) |
Italy |
[EMC]
EN 61000-4-2:2009; EN 61000-4-4:2012; EN 61000-4-5:2014 + A1:2017; EN 61000-4-6:2014; EN 61000-4-8:2010 (Accepted clauses of only continuous field up to 30 A/m); EN 61000-4-9:2016; EN IEC 61000-4-11:2020 + AC:2020 (All clauses (single-phase systems only)); EN 61000-4-16:2016 (All clauses except short duration disturbances); EN 61000-4-19:2014 (All clauses except Rectangular Modulation); EN 61000-4-20:2010; EN 55011:2016 + A1:2017 + A11:2020 (Accepted sub-slause 8.2 (Conducted Emissions)); EN 55014-1:2017 + A11:2020 (All clauses except 5.3.2, 5.3.3, 5.4.2); EN IEC 55015:2019 + A11:2020; EN 55032:2015 + A1:2020 + A11: 2020 (Accepted Annex A.3 (Conducted Emissions)); EN IEC 61000-6-1:2019 (All clauses except 1.1 Table 1 (Magnetic Field)); EN IEC 61000-6-2:2019 (All clauses except 1.1 Table 1 (Magnetic Field)); EN 61000-6-3:2007 + A1:2011 (All clauses except tests belonging to IEC 61000-3 series); EN IEC 61000-6-4:2019; EN 61326-1:2013 (All clauses except Radiated emission measurement and Electromagnetic field); EN IEC 61326-1:2021 (All clauses except Radiated emission measurement and Electromagnetic field); EN 61557-12:2008 (All clauses except radiated emission measurement and Electromagnetic field); EN IEC 61557-12:2022 (All clauses except radiated emission measurement and Electromagnetic field); EN 61543:1995 + A11:1995 + A12:2005 + A2:2006 (All clauses except Ref. T 2.5 of Tab. 2 and radiated emission measurements); EN IEC 61523:2023 + A11:2023 (All clauses except Radiated high-frequency phenomena and Radiated emission measurements); EN 60947-1:2007 + A1:2011 + A2:2014 (Accepted sub-clause 8.4.1 (except 8.4.1.2.3, 8.4.1.2.7)); EN 60947-2:2017 (Accepted Annex J (except J.2.3, J.3.3)); EN 61008-1:2012 + A1:2014 + A2:2014 + A11:2015 + A12:2017 (Accepted Annex H (except radiated emissions), Annex I (except Table 5 - T 2.5), Annex J); EN 61008-2-1:1994 + A11:1998 (Accepted Annex H (except radiated emissions), Annex I (except Table 5 - T 2.5), Annex J); EN 61009-1:2012 + A1:2014 + A2:2014 + A11:2015 + A12:2016 (Accepted Annex H (except radiated emissions), Annex I (except Table 5 - T 2.5), Annex J); EN 61009-2-1:1994 + A11:1998 (Accepted Annex H (except radiated emissions), Annex I (except Table 5 - T 2.5), Annex J); EN 62423:2012 (Accepted Annex H (except radiated emissions), Annex I (except Table 5 - T 2.5), Annex J); EN 62606:2013 + A1:2017 (Accepted Annex H (except radiated emissions), Annex I (except Table 5 - T 2.5), Annex J); EN 60669-2-1:2004 + A1:2009 + A12:2010 (Accepted clause 26 (except 26.1.5, 26.1.7)); EN IEC 60669-2-1:2022 + A11:2022 (Accepted clause 26 (except 26.1.5, 26.1.7)); EN 60669-2-5:2016 (Accepted clause 26 (except 26.2.6, 26.2.8, 26.3.1, 26.3.4)); EN 50491-5-1:2010 (All clauses except 6.2.2, 6.2.6, 6.3.2, 6.3.3)); EN 50491-5-2:2010 (All clauses except 6.2.2, 6.2.6, 6.3.2, 6.3.3)); EN 50130-4:2011 + A1:2014; ETSI EN 301 489-1 V2.2.3 (All clauses except Radiated emission measurement and Electromagnetic field); ETSI EN 301 489-3 V2.1.1 (All clauses except radiated emission measurement and Electromagnetic field); ETSI EN 301 489-17 V3.2.4 (All clauses except radiated emission measurement and Electromagnetic field); CLC/TR 50579:2012; EN 50470-1:2006 + A1:2018 (Accepted clauses 6.3.2, 6.3.3, 6.3.4, 7.3, 7.4.4, 7.4.5, 7.4.7, 7.4.8, 7.4.9, 7.4.13 (limited to conducted tests)); EN 50470-3:2006 + A1:2018 (Accepted clauses 8.1, 8.4, 8.7.2, 8.7.3, 8.7.4, 8.7.5.2, 8.7.5.3, 8.7.5.4, 8.7.6, 8.7.7.2, 8.7.7.3, 8.7.7.4, 8.7.7.5, 9.7.7.7, 8.7.7.8, 8.7.7.9, 8.7.9.3, 8.7.9.4, 8.7.10, 9, 10)); EN 62059-32-1:2012; EN IEC 62052-11:2021 + A11:2022 (Accepted clause 9 (except 9.3.2, 9.3.4, 9.3.5, 9.3.8 - Triangular Modulation, 9.3.12, 9.3.13, 9.3.14 - Radiated Emission)); EN 63024:2018 (Accepted clause 22 (except Radiated Emission measurement and Electromagnetic field))
|
2017-06-09 |
2023-06-06 |
IMQ-308/E-CTF2 Issue No: 1 |
E-CTF-3 |
ABB S.p.A. (LABORATORIO PROVE ABB) [Prod. Cat.: INST - PROT (Protection Devices)] |
Viale dell'Industria, 18
IT-20010 Vittuone
Milano (MI) |
Italy |
[POW]
EN 60947-1:2007 + A1:2011 + A2:2014 (All clauses except 9.4.2.3); EN IEC 60947-1:2021 (All clauses except 9.4.2.3); EN 60947-2:2006 + A1:2009 + A2:2013 (All clauses except Annex J); EN 60947-2:2016 + A1:2020 (All clauses except Annex J.2.3); EN 60947-3:2009 + A1:2012; EN IEC 60947-3:2021
[PROT]
EN 60898-1:2003 + A1:2004 + A11:2005 + A12:2008 + A13:2012; EN 60898-1:2019; EN 61008-1:2012 + A1:2014 + A2:2014 + A11:2015 + A12:2017 (All clauses except Test Sequence I (only IEC 61543 Table 5 - T2.5)); EN 61008-2-1:1994 + A11:1998 (All clauses except Test Sequence I (only IEC 61543 Table 5 - T2.5)); EN 61009-1:2012 + A1:2014 + A2:2014 + A11:2015 + A12:2016 (All clauses except Test Sequence I (only IEC 61543 Table 5 - T2.5)); EN 61009-2-1:1994 + A11:1998 (All clauses except Test Sequence I (only IEC 61543 Table 5 - T2.5)); EN 62423:2012 + A11:2021 + A12:2022 (All clauses except Test Sequence I (only IEC 61543 Table 5 - T2.5)); EN 62606:2013 + A1:2017 (All clauses except Test Sequence I (only IEC 61543 Table 5 - T2.5)); EN 60269-1:2007 + A1:2009 + A2:2014; HD 60269-2:2013; HD 60269-3:2010 + A1:2013 |
2003-06-19 |
2023-07-19 |
IMQ-019/E-CTF3 Issue No: 1 |
E-CTF-3 |
ARISTON S.p.A. (Laboratorio Prove) |
Via Pascoli, 1
IT-60044 Fabriano
Ancona (AN) |
Italy |
[HOUS]
EN 60335-1:2002 + A11:2004 + A1:2004 + A12:2006 + A2:2006 + A13:2008 + A14:2010 + A15:2011 (All clauses except 14, 19.11.4 (EMP), Annex F, Annex G, Annex H, Annex K, Annex R, Annex T, IEC/EN 62233 (EMF)); EN 60335-1:2012 + A11:2014 + A13:2017 + A1:2019 + A14:2019 + A2:2019 + A15:2021 (All clauses except 14, 19.11.4 (EMP), Annex F, Annex G, Annex H, Annex K, Annex R, Annex T, IEC/EN 62233 (EMF)); EN 60335-2-21:2003 + A1:2005 + A2:2008; EN 60335-2-21:2021 + A1:2021; EN 60335-2-35:2002 + A1:2007 + A2:2011; EN 60335-2-35:2016 + A1:2019 + A2:2021 (All clauses except Annex R); EN 60335-2-40:2003 + A11:2004 + A12:2005 + A1:2006 + A2:2009 + A13:2012
|
1991-04-08 |
2023-11-15 |
IMQ-012/E-CTF3 Issue No: 2 |
E-CTF-2 |
BAXI S.p.A. (R&D LABORATORY) |
Via Trozzetti, 20
IT-36061 Bassano del Grappa
Vicenza (VI) |
Italy |
[HOUS]
EN 60335-1:2012 + A11:2014 + A13:2017 + A14:2019 + A1:2019 + A2:2019 + A15:2021 (All clauses except 19.11.4 (EMP), 29, 30.1, 30.2); EN 60335-2-102:2016; EN 60529:1991 + A1:2000 + A2:2013 (All clauses (only for protection degrees IPX4, IPX5, IPXXD))
|
1997-07-18 |
2023-05-18 |
IMQ-002/E-CTF2 Issue No: 1 |
E-CTF-2 |
BEGHELLI S.p.A. (Laboratorio Certificazione Beghelli) |
Via Mozzeghine, 13/15
IT-40053 Valsamoggia - Località Monteveglio
Bologna (BO) |
Italy |
[LITE]
EN IEC 60598-1:2021 + A11:2022 (All clauses except 4.4.4, 4.13.6, 4.14.3, 4.18.2 / Annex F, 4.20, 4.24 / Annex P, 4.26, 4.28, 4.34, 4.35, 5.2.10, 9.2.1, 9.2.2, 9.2.3, 9.2.4, 9.2.5, 9.2.6, 9.2.7, 9.2.8, 9.2.9, 9.2.10, 9.2.11, 10.3.1, 12.5.1e) Annex C Fig. C3, 13.3.1, 13.4.1); EN 60598-2-1:1989; EN IEC 60598-2-1:2021; EN 60598-2-2:2012; EN 60598-2-3:2003 + A1:2011; EN 60598-2-5:2015; EN 60598-2-8:2013 (All clauses except 8.11.4.1, 8.16.1); EN 60598-2-22:2014 + A1:2020; EN IEC 60598-2-22:2022; EN 60598-2-24:2013; EN 61347-1:2015 + A1:2021 (All clauses except 14.6, 17, 18.2, 18.4, 18.5, 19, Annex B (B.9.5)); EN 61347-2-7:2012 + A1:2019 + A2:2022 (All clauses except 4.4.5 of IEC 62034 (prescribed in Annex K)); EN 61347-2-11:2001 + A1:2019; EN 61347-2-13:2014 + A1:2017; EN IEC 62031:2020 + A11:2021 (All clauses except 21, Annex D) |
2005-10-10 |
2024-05-22 |
IMQ-058/E-CTF2 Issue No: 3 |
E-CTF-2 |
BOCCHIOTTI S.p.A. |
Via Pian Masino, 109
IT-16011 Arenzano
Genova (GE) |
Italy |
[INST]
EN 50085-1:2005 + A1:2013; EN 50085-2-1:2006 + A11:2011; EN 50085-2-2:2008 (All clauses except 14.101); EN 50085-2-3:2010; EN 50085-2-4:2009; EN 61386-1:2008 + A1:2019; EN 61386-21:2004 + A11:2010; EN IEC 61386-21:2021 + A11:2021; EN 61386-22:2004 + A11:2010; EN IEC 61386-22:2021 + A11:2021; EN 61386-23:2004 + A11:2010; EN IEC 61386-23:2021 + A11:2021; EN 61386-25:2011; EN 60670-1:2005 + A1:2013 (All clauses except 19); EN IEC 60670-1:2021 + A11:2021 (All clauses except 19); EN 60670-22:2006; EN 60670-23:2008; EN 60670-24:2013; EN 62208:2011 (All clauses except 9.12, 9.13); EN IEC 62208:2023 (All clauses except 9.12, 9.13)
|
2005-10-10 |
2024-05-24 |
IMQ-056/E-CTF2 Issue No: 2 |
E-CTF-3 |
BTICINO S.p.A. (SALA PROVE BTICINO) |
Viale L. Borri, 231
IT-21100 Varese
Varese (VA) |
Italy |
[INST]
EN 50085-1:2005; EN 50085-2-1:2006 + A1:2011; EN 50085-2-3:2010; EN 50085-2-4:2009; EN 61242:1997 + A1:2008; EN 60309-1:1999 + A1:2007 + A2:2012 (All clauses except 8, 24.2); EN 60309-2:1999 + A1:2007 + A2:2012 (All clauses except 8, 24.2); EN 50250:2002 (All clauses except 8); EN 60669-1:1999 + A1:2002 + A2:2008; EN 60669-1:2018; EN 60669-2-1:2004 + A1:2009 + A12:2010; EN 50428:2005 + A1:2007 + A2:2009 (All clauses except 26.2.3, 26.2.4); EN 60669-2-2:2006; EN 60669-2-3:2006; EN 60669-2-4:2005; EN 60669-2-5:2016 (All clauses except 26.2.3, 26.2.4); EN 62080:2009 + A2:2015; EN 62094-1:2003 + A11:2003; EN 60998-1:2004; EN 60998-2-1:2004; EN 60670-1:2005 + A1:2013; EN IEC 60670-1:2021 + A11:2021; EN 60670-22:2008; EN 60670-24:2013; EN 61386-1:2008 + A1:2019 (All clauses except 13.1.3.2); EN 61386-21:2004 + A11:2010; EN IEC 61386-21:2021 + A11:2021 (All clauses except 13.1.3.2); EN 61386-22:2004 + A11:2010; EN IEC 61386-22:2021 + A11:2021 (All clauses except 13.1.3.2); EN 61386-23:2004 + A11:2010; EN IEC 61386-23:2021 + A11:2021 (All clauses except 13.1.3.2); EN 62444:2013
[POW]
EN 62019:1999 + A1:2003 + A11:2005 + A12:2014; 2004; EN 60439-1:1999 + A1:2004; EN 61439-1:2011; EN 61439-2:2011; EN 60947-1:2007 + A1:2011 + A2:2014; EN IEC 60947-1:2021; EN 60947-2:2006 + A1:2009 + A2:2013; EN 60947-2:2017; EN 60947-3:2009 + A1:2012 + A2:2015; EN IEC 60947-3:2021; EN 60947-5-1:2004 + A1:2009
[CONT]
EN 60934:2001 + A1:2007 + A2:2013
[PROT]
EN 60898-1:2003 + A1:2004 + A11:2005 + A12:2008 + A13:2012; EN 60898-1:2019; EN 61008-1:2012 + A1:2014 + A2:2014; EN 61008-2-1:1994 + A11:1998; EN 61009-1:2012 + A1:2014 + A2:2014; EN 61009-2-1:1994 + A11:1998; EN 62423:2012; EN 50557:2011; EN 61643-11:2012 + A11:2018
[EMC]
EN 61543:1995 + A11:2003 + A12:2005 + A2:2006 |
2006-03-16 |
2023-05-04 |
IMQ-060/E-CTF3 Issue No: 2 |
E-CTF-2 |
BTICINO S.p.A. (SALA PROVE BTICINO) [Prod. Cat.: INST] |
Strada della Guasca, 201
IT-15122 Spinetta Marengo
Alessandria (AL) |
Italy |
[INST]
EN 61386-1:2008 + A1:2019; EN 61386-21:2004 + A11:2010 (Accepted clause 13.1.3.2); EN IEC 61386-21:2021 + A11:2021 (Accepted clause 13.1.3.2); EN IEC 61386-22:2021 + A11:2021 (Accepted clause 13.1.3.2); EN IEC 61386-23:2021 + A11:2021 (Accepted clause 13.1.3.2); EN 61537:2007 |
2007-12-31 |
2023-11-16 |
IMQ-206/E-CTF2 Issue No: 1 |
E-CTF-3 |
CANDY HOOVER GROUP S.r.l. (EMC/LVD Washing Lab) |
Via Comolli, 16
IT-20861 Brugherio
Monza-Brianza (MB) |
Italy |
[HOUS]
EN 60335-1:2012 + A11:2014 + A13:2017 + A1:2019 + A14:2019 + A2:2019 + A15:2021 + A16:2023 (All clauses except 14, 19.11.4.2); EN 60335-2-5:2015 + A11:2019 + A1:2020; EN 60335-2-7:2010 + A1:2013 + A11:2013 + A2:2019; EN IEC 60335-2-7:2023 + A11:2023; EN 60335-2-11:2010 + A11:2012 + A1:2015 + A2:2018 (All clauses except Annex BB); EN IEC 60335-2-11:2022 + A11:2022 (All clauses except Annex BB); EN 61770:2009 + A11:2018 + A1:2019 + A12:2022 (All clauses except:
§8 – Dynamic backflow preventers
§9 – Hose-sets)
[EMC]
EN 62233:2008
|
2005-01-01 |
2023-10-18 |
IMQ-005/E-CTF3 Issue No: 2 |
E-CTF-2 |
Cariboni Group S.p.A. |
Via della Tecnica, 19
IT-23875 Osnago
Lecco (LC) |
Italy |
[LITE]
EN IEC 60598-1:2021 + A11:2022 (All clauses except 4.4.4, 4.4.5, 4.13.6, 4.14.1, 4.14.2, 4.14.3, 4.18.2 / Annex F, 4.20, 4.24 / Annex P, 4.26, 4.28, 4.34, 4.35, 8.2.7, 9.2.1, 9.2.2, 9.2.3, 9.2.4, 9.2.5, 9.2.9, 9.2.10, 9.2.11, 9.3.1, 12.7.2, 13.3.1, 13.3.2, 13.4.1); EN IEC 60598-2-1:2021; EN 60598-2-2:2012; EN 60598-2-3:2003 + A1:2011; EN 60598-2-5:2015; EN 60598-2-13:2006 + A1:2012 + A2:2016 + A11:2021 (All clauses except 13.6.1, 13.6.2.1, 13.6.2.2); EN 60598-2-24:2013; EN IEC 62031:2020 + A11:2021 (All clauses except 4.8, 6.2g), 7, 10, 12.1, 16, 17, 18, 20, 21, Annex A, Annex D); EN 62262:2002 All clauses [Test Eha (pendulum hammer), Test Ehb (Spring hammer) and Test Ehc (Vertical hammer) according to IEC/EN 60068-2-75:2014)] |
2018-04-09 |
2024-05-22 |
IMQ-045/E-CTF2 Issue No: 3 |
E-CTF-2 |
DE’ LONGHI APPLIANCES S.r.l. (Laboratorio CAFFE’) |
Via Lodovico Seitz, 47
IT-31100 Treviso
Treviso (TV) |
Italy |
[HOUS]
EN 60335-1:2012 + A11:2014 + A13:2017 + A1:2019 + A14:2019 + A2:2019 + A15:2021 + A16:2023 (All clauses except 14, 15.1, 19.11.4 (EMP), 22.32, 22.48, Annex N, Annex R, Annex T); EN 60335-2-14:2006 + A1:2008 + A11:2012 + A12:2016; EN 60335-2-15:2016 + A11:2018 + A1:2021 + A2:2021 + A12:2021; EN 60335-2-75:2004 + A11:2006 + A1:2005 + A2:2008 + A12:2010 (All clauses except 15.1.1, Annex AA); EN IEC 60335-2-75:2023 + A11:2023 + A1:2023 + A2:2023 (All clauses except 15.1.1, Annex AA)
|
2006-02-08 |
2024-05-21 |
IMQ-066/E-CTF2 Issue No: 2 |
E-CTF-2 |
DE’ LONGHI APPLIANCES S.r.l. (Laboratorio COMFORT) |
Via Lodovico Seitz, 47
IT-31100 Treviso
Treviso (TV) |
Italy |
[HOUS]
EN 60335-1:2012 + A11:2014 + A13:2017 + A1:2019 + A14:2019 + A2:2019 + A15:2021 + A16:2023 (All clauses except 14, 15.1, 19.11.4 (EMP), 22.32, 22.48, Annex N, Annex R, Annex T); EN 60335-2-30:2009 + A11:2012 + A1:2020 + A12:2020 + A13:2022 + A2:2022; EN 60335-2-43:2003 + A1:2006 + A2:2008; EN IEC 60335-2-43:2020 + A11:2020; EN 60335-2-65:2003 + A1:2008 + A11:2012 + A12:2022 + A2:2022 (All clauses except 32, Annex AA); EN 60335-2-80:2003 + A1:2004 + A2:2009
|
2005-07-05 |
2024-05-23 |
IMQ-029/E-CTF2 Issue No: 2 |
E-CTF-2 |
DE’ LONGHI APPLIANCES S.r.l. (Laboratorio COTTURA) |
Via Lodovico Seitz, 47
IT-31100 Treviso
Treviso (TV) |
Italy |
[HOUS]
EN 60335-1:2012 + A11:2014 + A13:2017 + A1:2019 + A14:2019 + A2:2019 + A15:2021 (All clauses except 14, 15.1, 19.11.4 (EMP), 22.48, Annex N, Annex R, Annex T); EN 60335-2-9:2003 + A1:2004 + A2:2006 + A12:2007 + A13:2010; EN IEC 60335-2-9:2023 + A11:2023; EN 60335-2-13:2010 + A11:2012 + A1:2019; EN 60335-2-15:2016 + A11:2018 + A1:2021 + A2:2021 + A12:2021 |
2006-02-08 |
2023-11-14 |
IMQ-067/E-CTF2 Issue No: 1 |
E-CTF-2 |
DE’ LONGHI APPLIANCES s.r.l. (Laboratorio STIRO & PULIZIA) |
Via Lodovico Seitz, 47
IT-31100 Treviso
Treviso (TV) |
Italy |
[HOUS]
EN 60335-1:2012 + A11:2014 + A13:2017 + A1:2019 + A14:2019 + A2:2019 + A15:2021 + A16:2023 (All clauses except 14, 15.1, 19.11.4 (EMP), 22.32, 22.48, Annex N, Annex R, Annex T); EN 60335-2-2:2010 + A11:2012 + A1:2013 (All clauses except 21); EN 60335-2-3:2016 + A1:2020; EN 60335-2-85:2003 + A1:2008 + A11:2018 + A2:2020
|
2006-07-11 |
2024-05-20 |
IMQ-096/E-CTF2 Issue No: 3 |
E-CTF-2 |
DISANO ILLUMINAZIONE S.p.A. (Laboratorio Misure e Prove) |
Via Scaldasole, 8
IT-27020 Dorno
Pavia (PV) |
Italy |
[LITE]
EN 60598-1:2015 + A1:2018 (All clauses except 4.4.4, 4.11.6, 4.13.4, 4.13.6, 4.14.3, 4.18.1, 4.18.2 / Annex F, 4.20, 4.24 / Annex P, 4.26, 4.28, 9.2.3, 9.3.1, 12.7.2, 13.3.1, 13.4.1); EN IEC 60598-1:2021 (All clauses except 4.4.4, 4.11.6, 4.13.4, 4.13.6, 4.14.3, 4.18.1, 4.18.2 / Annex F, 4.20, 4.24 / Annex P, 4.26, 4.28, 4.34, 4.35, 4.36, 9.2.3, 9.2.9, 9.2.10, 9.2.11, 9.3.1, 12.7.2, 13.3.1, 13.4.1); EN 60598-2-1:1989; EN IEC 60598-2-1:2021; EN 60598-2-2:2012; EN 60598-2-3:2003 + A1:2011; EN 60598-2-5:2015; EN 60598-2-13:2006 + A1:2012 + A2:2016 + A11:2021 (All clauses except 13.6.2.1, 13.6.2.2); EN 60598-2-22:2014 + A1:2020 (All clauses except 22.17.5 Annex C); EN IEC 62031:2020 + A11:2021 (All clauses except 4.8, 6.2 g), 7, 10, 16, 17, 18, 20, 21, Annex A, Annex D); EN 62262:2002 - IEC TR 62696:2011 (All clauses [Test Ehb (Spring hammer) and Test Ehc (Vertical hammer) according to IEC/EN 60068-2-75:2014)]
|
2005-08-02 |
2024-06-25 |
IMQ-037/E-CTF2 Issue No: 2 |
E-CTF-2 |
DUCATI ENERGIA S.p.A. |
Via M.E. Lepido, 182
IT-40132 Bologna
Bologna (BO) |
Italy |
[CAP]
EN 60252-1:2011 + A1:2013 (Accepted clauses 5.5, 5.7, 5.8, 5.9, 5.12, 5.13, 5.15, 5.16); EN 60831-1:2014 (Accepted clauses 7, 8, 9, 10, 11, 12, 13, 14, 15, 16); EN 60831-2:2014 (Accepted clauses 17, 18, 19) |
2005-11-22 |
2022-11-07 |
IMQ-080/E-CTF2 Issue No: 1 |
E-CTF-2 |
ELETTROTECNICA ROLD S.r.l. |
Via della Merlata, 1
IT-20014 Nerviano
Milano (MI) |
Italy |
[CONT]
EN 60730-1:2011 (All clauses except 23, 26, Annex H); EN 60730-1:2016 + A1:2019 + A2:2022 (All clauses except 23, 26, Annex H); EN 60730-2-12:2006 + A11:2008 (All clauses except 23, 26, Annex H); EN IEC 60730-2-12:2019 (All clauses except 23, 26, Annex H); EN IEC 60730-2-14:2019 + A1:2022 + A2:2021 (All clauses except 23, 26, Annex H)
[INST]
EN IEC 61058-1:2018 (All clauses except 10.4, 14.1, 14.2, 19.2.4, 19.2.5, 23, 25); EN 61058-1-1:2016 (All clauses except 23) |
2005-07-07 |
2023-06-28 |
IMQ-031/E-CTF2 Issue No: 1 |
E-CTF-2 |
EMBRACO SLOVAKIA s.r.o.(Electrical Laboratory) |
Odorínska Cesta, 2
SK-05201 Spi?ská Nová Ves |
Slovakia |
[HOUS]
EN 60335 1:2012 + A11:2014 + A13:2017 (Accepted clauses: 7, 13.3, 16, 19 (except 19.11.4), 22.7, 22.9, 24.5, 30.1); EN 60335-2-34:2013 (Accepted clauses: 7, 13.3, 16, 19 (except 19.11.4), 22.7, 22.9, 22.101, 24.5, 30.1, Annex AA) |
2007-08-01 |
2021-06-09 |
IMQ-116/CTF2-B |
E-CTF-2 |
EVOCA S.p.A. (Laboratorio Ricerca e Sviluppo) |
Via Roma, 24
IT-24030 Valbrembo
Bergamo (BG) |
Italy |
[HOUS]
EN 60335-1:2002 + A11:2004 + A1:2004 + A12:2006 + A2:2006 + A13:2008 + A14:2010 + A15:2011 (All clauses except 14, 15.1, 19.11.4, 21.1, 22.3, 22.12, 22.32, 22.48, 23.3, 25.14, 26.3, 28.1, 29.2, 30, Annex T); EN 60335-1:2012 + A11:2014 + A13:2017 + A1:2019 + A14:2019 + A2:2019 + A15:2021 (All clauses except 14, 15.1, 19.11.4, 22.3, 22.12, 22.32, 22.48, 23.3, 25.14, 26.3, 28.1, 29.2 / Annex N, 30, Annex R, Annex T); EN 60335-2-24:2010 + A1:2019 + A2:2019 + A11:2020 (Accepted clauses 7, 10, 11, 19, 22.104, 22.105, 22.112, 22.113, 22.114, 22.115, 24, Annex AA); EN IEC 60335-2-24:2022 + A11:2022 (Accepted clauses 7, 10, 11, 19, 22.104, 22.105, 22.112, 22.113, 22.114, 22.115, 24, Annex AA); EN 60335-2-75:2004 + A1:2005 + A11:2006 + A2:2008 + A12:2010 (All clauses except 15.1.1, 22.47); EN IEC 60335-2-75:2023 + A1:2023 + A2:2023 (All clauses except 15.1.1) |
2018-01-10 |
2026-06-16 |
IMQ-143/E-CTF2 Issue No: 3 |
E-CTF-2 |
FABER S.p.A. (R&D Laboratory) |
Viale XIII Luglio, 160
IT-60044 Fabriano
Fabriano (AN) |
Italy |
[HOUS]
EN 60335-1:2012 + A11:2014 + A13:2017 + A1:2019 + A14:2019 + A2:2019 + A15:2021 + A16:2023 (All clauses except 14, 15.1, 19.11.4 (EMP), 22.48); EN 60335-2-6:2015 + A1:2020 + A11:2020 (All clauses except 11.3 (probe figure 104), 22.110, 22.111, 29.3 (test probe 41 of IEC 61032)); EN 60335-2-31:2014 + A1:2023 + A11:2023 + A2:2023 |
2006-03-24 |
2024-01-26 |
IMQ-093/E-CTF2 Issue No: 3 |
E-CTF-2 |
FANTON S.p.A. |
Viale dell’Industria, 8/10
IT-35026 Conselve
Padova (PD) |
Italy |
[INST]
EN 61242:1997 + A1:2008 + A2:2016 + A13:2017
|
2005-09-22 |
2023-11-17 |
IMQ-044/E-CTF2 Issue No: 2 |
E-CTF-2 |
FINDER S.p.A. |
Via Drubiaglio, 14
IT-10040 Almese
Torino (TO) |
Italy |
[INST]
EN 60669-1:2018 (All clauses except 15.2, 20, 24.2, 26); EN 60669-2-1:2004 + A1:2009 + A12:2010 (All clauses except 15.2, 20, 24.2, 26); EN IEC 60669-2-1:2022 + A11:2022 (All clauses except 15.2, 20, 24.2, 26); EN 60669-2-2:2006 (All clauses except 15.2, 20, 24.2, 26)
[CONT]
EN 61810-1:2015 + A1:2020 (All clauses except 13); EN 61810-3:2015; EN 61095:2009 (All clauses except 9.3.3.4.1 item b (Impulse withstand voltage test), 9.3.4); EN 60730-1:2016 + A1:2019 + A2:2022 (Accepted clauses 13, 14, 16, 17, Annex U) |
2006-02-21 |
2023-03-23 |
IMQ-068/E-CTF2 Issue No: 2 |
E-CTF-2 |
ELBA ITALY S.p.A. (Laboratorio Ricerca e Sviluppo)
[Former: FISHER & PAYKEL APPLIANCES ITALY S.p.A. (Laboratorio Ricerca e Sviluppo)] |
Via Fabbian Matteo, 7
IT-31030 Borso del Grappa
Treviso (TV) |
Italy |
[HOUS]
EN 60335-1:2002 + A11:2004 + A1:2004 + A12:2006 + A2:2006 + A13:2008 + A14:2010 + A15:2011 (All clauses except 19.11.4 (EMP),
22.48, 30, Annex E, Annex F, Annex
H, Annex N, Annex R, Annex T,
IEC/EN 62233 (EMF)); EN 60335-1:2012 + A11:2014 + A13:2017 + A1:2019 + A2:2019 + A14:2019 + A15:2021 + A16:2023 (All clauses except 19.11.4 (EMP), 22.48, 30, Annex E, Annex F, Annex H, Annex N, Annex R, Annex T, IEC/EN 62233 (EMF)); EN 60335-2-6:2015 + A11:2020 + A1:2020 (All clauses except 22.110, 22.111, 29, 30.1, 30.2, 32.101); EN 60335-2-102:2016 (All clauses except 8.101) |
2009-03-31 |
2024-05-03 |
IMQ-150/E-CTF2 Issue No: 3 |
E-CTF-2 |
FLOS S.p.A. |
Via Angelo Faini, 2
IT-25073 Bovezzo
Brescia (BS) |
Italy |
[LITE]
EN IEC 60598-1:2021 + A11:2022 (All clauses except 4.4.4, 4.4.5, 4.13.4, 4.13.6, 4.18.2 / Annex F, 4.20, 4.24 / Annex P, 4.26, 4.28, 4.34, 4.35, 4.36, 9.2.1, 9.2.2, 9.2.3, 9.2.4, 9.2.5, 9.2.6, 9.2.7, 9.2.8, 9.2.9, 9.2.10, 9.2.11, 9.3.1, 13.3.1); EN 60598-2-1:1989; EN IEC 60598-2-1:2021; EN 60598-2-2:2012; EN 60598-2-3:2003 + A1:2011; EN 60598-2-4:2018; EN 60598-2-5:2015; EN 60598-2-13:2006 + A1:2012 + A2:2016 + A11:2021 (All clauses except 13.6.1, 13.6.2.1, 13.6.2.2); EN IEC 60598-2-23:2021; EN 60598-2-24:2013 |
2005-09-22 |
2024-04-10 |
IMQ-043/E-CTF2 Issue No: 2 |
E-CTF-3 |
GEWISS S.p.A. [Cenate Sotto] |
Via Domenico Bosatelli, 1
IT-24069 Cenate Sotto
Bergamo (BG) |
Italy |
[INST]
EN 50085-1:2005 + A1:2013; EN 50085-2-1:2006 + A1:2011; EN 50085-2-3:2010; EN 61386-1:2008 (All clauses (only for accessories)); EN 61386-21:2004 + A11:2010 (All clauses (only for accessories)); EN 61386-22:2004 + A11:2010 (All clauses (only for accessories)); EN 61386-23:2004 + A11:2010 (All clauses (only for accessories)); EN 61386-24:2010 (All clauses (only for accessories)); EN 60309-1:1999 + A1:2007 + A2:2012; EN IEC 60309-1:2022; EN 60309-2:1999 + A1:2007 + A2:2012; EN IEC 60309-2:2022; EN 60309-4:2007 + A1:2012; EN IEC 60309-4:2022; EN 50250:2002 + A1:2015; EN 60669-1:1999 + A1:2002 + A2:2008; EN 60669-1:2018; EN 60669-2-1:2004 + A1:2009 + A12:2010 (All clauses except 26); EN IEC 60669-2-1:2022 + A11:2022 (All clauses except 26); EN 60669-2-2:2006 (All clauses except 26); EN 60669-2-3:2006 (All clauses except 26); EN 60669-2-4:2005; EN 62094-1:2003 + A11:2003; EN 60998-1:2004; EN 60998-2-1:2004; EN 60670-1:2005 + A1:2013; EN IEC 60670-1:2021 + A11:2021; EN 60670-22:2006; EN 60670-24:2013; EN 62208:2011; EN 61984:2009 (All clauses except 7.3.14)
[POW]
EN 60947-1:2007 + A1:2011 + A2:2014; EN IEC 60947-1:2021; EN 60947-2:2006 + A1:2009 + A2:2013 (All clauses except Annex J); EN 60947-2:2017 + A1:2020 (All clauses except Annex J); EN 60947-3:2009 + A1:2012 + A2:2015; EN IEC 60947-3:2021; EN 60947-5-1:2017; EN 61439-1:2011; EN IEC 61439-1:2021; EN 61439-2:2011; EN IEC 61439-2:2021; EN 61439-3:2012; EN 61439-4:2013; EN 61439-5:2015; EN 61439-6:2012; EN IEC 61439-7: 2023; EN 62019:1999 + A1:2003 + A11:2005 + A12:2014
[CONT]
EN 61095:2009
[PROT]
EN 60898-1:2003 + A1:2004 + A11:2005 + A12:2008 + A13:2012; EN 60898-1:2019; EN 61008-1:2012 + A1:2014 + A2:2014 + A11:2015 + A12:2017 (All clauses except test sequences H, I, J); EN 61008-2-1:1994 + A11:1998 (All clauses except test sequences H, I, J); EN 61009-1:2012 + A1:2014 + A2:2014 + A11:2015 + A12:2017 (All clauses except test sequences H, I, J); EN 61009-2-1:1994 + A11:1998 (All clauses except test sequences H, I, J); EN 62423:2012 + A11:2021 + A12:2022n(All clauses except test sequences H, I, J); EN 63024:2018 (All clauses except test sequence G)
[ELVH]
EN 62196-1:2014 (All clauses except 26.4); EN IEC 62196-1:2022 (All clauses except 26.4); EN 62196-2:2017; EN IEC 62196-2:2022; EN IEC 62196-3:2022; EN IEC 61851-1:2019
|
2001-09-12 |
2024-07-02 |
IMQ-008/E-CTF3 Issue No: 5 |
E-CTF-3 |
GEWISS S.p.A. [Cenate Sopra] |
Via Provinciale, 61
IT-24060 Cenate Sopra
Bergamo (BG) |
Italy |
[LITE]
EN 60598-1:2015 + A1:2018 (All clauses except 4.13.4, 4.14.1, 4.20, 4.24 / Annex P, 4.26, 9.2.9); EN IEC 60598-1:2021 + A11:2022 (All clauses except 4.14.1, 4.20, 4.24 / Annex P, 4.26); EN 60598-2-1:1989; EN IEC 60598-2-1:2021; EN 60598-2-2:2012; EN 60598-2-3:2003 + A1:2011; EN 60598-2-4:2018; EN 60598-2-5:2015; EN 60598-2-22:2014 + A1:2020 (All clauses except 22.17.1 Annex C); EN 60598-2-24:2013; EN 61347-1:2015 + A1:2021; EN 61347-2-7:2012 + A1:2019 + A2:2022; EN 61347-2-13:2014 + A1:2017; EN IEC 62031:2020 + A11:2021 (All clauses except 21); EN 62262:2002 + A1:2021 - IEC TR 62696:2011 (Accepted test method: Eha: Pendulum Hammer)
|
2020-07-07 |
2024-02-06 |
IMQ-374/E-CTF3 Issue No: 2 |
E-CTF-2 |
GEWISS S.p.A. (Laboratorio Prove GW130) |
Via Emilia Pavese, 53
IT-29015 Castel San Giovanni
Piacenza (PC) |
Italy |
[INST]
EN 61386-1:2008 + A1:2017 (All clauses except 14); EN 61386-21:2004 + A11:2010 (All clauses except 14); EN IEC 61386-22:2021 + A11:2021 (All clauses except 14); EN 61386-22:2004 + A11:2010 (All clauses except 14); EN IEC 61386-22:2021 + A11:2021 (All clauses except 14); EN 61386-23:2004 + A11:2010 (All clauses except 14); EN IEC 61384-23 (All clauses except 14)
|
2016-04-13 |
2022-09-15 |
IMQ-284/E-CTF2 Issue No: 1 |
E-CTF-3 |
HAGER ELECTRO SAS |
Boulevard d'Europe, 132
FR-67210 CEDEX Obernai |
France |
[INST]
EN 60669-1:1999 + A1:2002 + A2:2008; EN 60669-1:2018; EN 60669-2-2:2006; EN 60669-2-4:2005
[POW]
EN 60947-1:2007 + A1:2011 + A2:2014 (All clauses and for EMC only Immunity testing); EN IEC 60947-1:2021 (All clauses and for EMC only Immunity testing); EN 60947-2:2006 + A1:2009 + A2:2013 (All clauses and for EMC only Immunity testing); EN 60947-2:2017 + A1:2020 (All clauses and for EMC only Immunity testing); EN 60947-3:2009 + A1:2012 + A2:2015 (All clauses and for EMC only Immunity testing); EN IEC 60947-3:2021 (All clauses and for EMC only Immunity testing); EN 60947-4-1:2010 + A1:2012; EN IEC 60947-4-1:2019; EN 60947-5-1:2004 + A1:2009 (All clauses and for EMC only Immunity testing); EN 60947-5-1:2017 (All clauses and for EMC only Immunity testing)
[PROT]
EN 60898-1:2003 + A1:2004 + A11:2005 + A12:2008 + A13:2012; EN 60898-1:2019; EN 61008-1:2012 + A1:2014 + A2:2014 + A11:2015 + A12:2017 (All clauses and for EMC only Immunity testing); EN 61008-2-1:1994 + A11:1998 (All clauses and for EMC only Immunity testing); EN 61009-1:2012 + A1:2014 + A2:2014 + A11:2015 + A12:2016 + A13:2021 (All clauses and for EMC only Immunity testing); EN 61009-2-1:1994 + A11:1998 (All clauses and for EMC only Immunity testing); EN 62423:2012 + A11:2021 + A12:2022 (All clauses and for EMC only Immunity testing)
[CONT]
EN 61095:2009
[SAFE]
EN 61558-1:2005 + A1:2009 (All clauses except the determination of Comparative Tracking Index (CTI) and Degrees of protection above IP2X); EN IEC 61558-1:2019 (All clauses except the determination of Comparative Tracking Index (CTI) and Degrees of protection above IP2X); EN 61558-2-6:2009 (All clauses except the determination of Comparative Tracking Index (CTI) and Degrees of protection above IP2X); EN 61558-2-8:2010 (All clauses except the determination of Comparative Tracking Index (CTI) and Degrees of protection above IP2X)
|
2010-04-14 |
2023-12-21 |
IMQ-188/E-CTF3 Issue No: 2 |
E-CTF-1 |
ICEL S.r.l. (LABORATORIO E SALA PROVE ICEL) |
Via Carlo Jucker, 16
IT-21053 Castellanza
Varese (VA) |
Italy |
[CAP]
EN 60252-1:2011 + A1:2013 (Accepted clauses 5.5, 5.9, 5.13, 5.14)
|
2005-09-30 |
2024-05-29 |
IMQ-048/E-CTF1B Issue No: 3 |
E-CTF-2 |
IGUZZINI ILLUMINAZIONE S.p.A. (Laboratorio Normativo/Sicurezza) |
Via Mariano Guzzini, 37
IT-62019 Recanati
Macerata (MC) |
Italy |
[LITE]
EN IEC 60598-1:2021 + A11:2022 (All clauses except 4.13.6, 4.20, 4.28, 4.34, 4.35, 9.2.10, 9.2.11, 13.3.1); EN IEC 60598-2-1:2021; EN 60598-2-2:2012; EN 60598-2-3:2003 + A1:2011; EN 60598-2-4:2018; EN 60598-2-5:2015; EN 60598-2-13:2006 + A1:2012 + A2:2016 + A11:2021; EN 60598-2-22:2014 + A1:2020; EN IEC 60598-2-22:2022; EN 60598-2-24:2013; EN 62031:2020 + A11:2021 (All clauses except 7, 21.1, Annex A, Annex D); EN 60570:2003 + A1:2018 + A2:2020; EN 62262:2002 + A1:2021 - IEC TR 62696:2011 (Accepted clause test Ehc (vertical hammer), according to IEC 60068-2-75:2014); IEC TR 62778:2014
[EMC]
EN IEC 61000-3-2:2019 + A1:2021; EN 61000-3-3:2013 + A1:2019 + A2:2021; EN IEC 55015:2019 + A11:2020 (All clauses except: - No. 7 Method of insertion loss measurement - No. 9 Method of radiated electromagnetic disturbances (semi-anechoic chamber)); EN 61000-4-5:2014 + A1:2017
|
1992-02-07 |
2024-04-03 |
IMQ-011/E-CTF2 Issue No: 2 |
E-CTF-2 |
INCO MASSALOMBARDA S.r.l. (LABORATORIO SALA PROVE) |
Via Marchetti, 88
IT-48024 Massa Lombarda
Ravenna (RA) |
Italy |
[CAP]
EN 60252-1:2011 + A1:2013 (Accepted clauses 5.5, 5.7, 5.8, 5.9, 5.12, 5.13, 5.15, 5.16)
|
2005-09-30 |
2023-12-01 |
IMQ-050/E-CTF2 Issue No: 2 |
E-CTF-2 |
ITW Appliance Components S.r.l. (ITW EMEA Laboratory) |
Via Oltrona, 23
IT-21020 Barasso (VA) |
Italy |
[INST]
EN 60998-1:2004 (All clauses except 12.3); EN 60998-2-1:2004; EN 60998-2-2:2004; EN IEC 61058-1:2018 (Only for mechanical switches - Only for resistive-motor load); EN 61058-1-1:2016 (Only for mechanical switches - Only for resistive-motor load); EN 61058-2-4:2005 (Only for mechanical switches - Only for resistive-motor load); EN IEC 61058-2-4:2021 (Only for mechanical switches - Only for resistive-motor load);
[HOUS]
EN 60335-1:2012 + A11:2014 (Accepted clauses 25.15, 28, 30 (except 30.2.4), Annex N); EN IEC 60335-1:2023 + A11:2023 (Accepted clauses 25.15, 28, 30 (except 30.2.4), Annex N)
|
2018-09-20 |
2024-09-25 |
IMQ-343/E-CTF2 Issue No: 3 |
E-CTF-2 |
IVELA S.r.l. |
Via Bruno Buozzi, 15
IT-20060 Liscate
Milano (MI) |
Italy |
[LITE]
EN IEC 60598-1:2021 + A11:2022 (All clauses except 4.4.4, 4.4.5, 4.9.2, 4.12.5, 4.13.4, 4.13.6, 4.14.3, 4.18.2 / Annex F, 4.20, 4.24 / Annex P, 4.28, 4.34, 4.35, 5.2.10.1, 8.2.7, 9.2.1, 9.2.2, 9.2.3, 9.2.9, 9.2.10, 9.2.11, 9.3.1, 10.3, 11.2.1, 13.3.1, 13.4.1); EN IEC 60598-2-1:2021; EN 60598-2-2:2012; EN 60598-2-3:2003 + A1:2011; EN 60598-2-4:2018; EN 60598-2-5:2015; EN 60598-2-13:2006 + A1:2012 + A2:2016 + A11:2021 (All clauses except 13.6.1, 13.6.2.1, 13.6.2.2); EN 60570:2003 + A1:2018 + A2:2020 (All clauses except 12.3.1, 14) |
2005-09-23 |
2024-05-22 |
IMQ-047/E-CTF2 Issue No: 2 |
E-CTF-2 |
KEMET ELECTRONICS CORPORATION - KEMET ELECTRONICS ITALIA S.r.l. |
Via Sagittario, 1/3
IT-40037 Sasso Marconi
Bologna (BO) |
Italy |
[CAP]
EN 60252-1:2011 + A1:2013 (Accepted clauses 5.5, 5.7, 5.8, 5.9, 5.12, 5.13, 5.14, 5.15, 5.16); EN 60252-2:2011 + A1:2013 (All clauses except 5.1.17, 6); EN 60384-14:2013 + A1:2016 (Accepted clauses 4.1, 4.2, 4.3, 4.4, 4.11, 4.12, 4.13, 4.14, 4.15, 4.17, 4.18, 4.20, Annex H, Annex I); EN 60831-1:2014 (Accepted clauses 7, 8, 9, 10, 11, 12, 13, 14, 15, 16); EN 60831-2:2014 (Accepted clauses 17, 18, 19)
[LITE]
EN 61048:2006 + A1:2016 (Accepted clauses 13, 14, 15, 17, 18); EN 61049:1993 (Accepted clauses 6, 8)
|
2005-09-30 |
2024-09-18 |
IMQ-052/E-CTF2 Issue No: 3 |
E-CTF-2 |
LOVATO ELECTRIC S.p.A. (LABORATORIO DI PROVA (LPR)) |
Via Don Emilio Mazza, 12
IT-24020 Gorle (BG) |
Italy |
[CONT]
EN 60730-1:2016 + A1:2019 (Accepted clauses 11.3.5, 11.3.6, 11.3.7, 11.3.8, 17)
[POW]
EN 60947-1:2007 + A1:2011 + A2:2014 (All clauses except 8.4); EN 60947-3:2009 + A1:2012 + A2:2015 (All clauses except 8.4); EN 60947-4-1:2018 (All clauses except 9.4); EN 60947-5-1:2016 (All clauses except 8.4) |
2017-11-06 |
2021-09-27 |
IMQ-311/E-CTF2 Issue No: 0 |
E-CTF-2 |
MENEGHETTI S.p.A. |
Via Generale Cadore, 26
IT-21010 Cardano al Campo (VA) |
Italy |
[HOUS]
EN 60335-1:2002 + A11:2004 + A1:2004 + A12:2006 + A2:2006 + A13:2008 + A14:2010 + A15:2011 (All clauses except 8, 14, 15.1, 15.3,
19.11.4, 22.11, 22.12, 22.16, 22.48,
25.14, 25.15, 26, 28, 30, Annex F,
Annex H, Annex R, Annex T, IEC/EN
62233 (EMF); EN 60335-1:2012 + A11:2014 + A13:2017 + A1:2019 + A2:2019 + A14:2019 + A15:2021 (All clauses except 8, 14, 15.1, 15.3,
19.11.4, 22.11, 22.12, 22.16, 22.48,
25.14, 25.15, 26, 28, 30, Annex F,
Annex H, Annex R, Annex T, IEC/EN
62233 (EMF); EN 60335 2-6:2015 + A1:2020 + A11:2020 (All clauses except 19.101, 19.102, 21.102, 22.110, 22.111, 22.135, 22.136, 30, 32.101); EN IEC 60335-2-25:2021 + A11:2021 (All clauses except 16, 18, 22.105, 22.106, 22.115, 22.116, 22.119, Annex BB); EN 60335-2-102:2016 (All clauses except 8.101) |
2018-09-17 |
2024-02-12 |
IMQ-342/E-CTF2 Issue No: 3 |
E-CTF-2 |
PALAZZOLI S.p.A. (TEST LABORATORY) |
Via F. Palazzoli, 31
IT-25128 Brescia (BS) |
Italy |
[INST]
EN 60309-1:1999 + A1:2007 + A2:2012 (All clauses except 29, 30); EN IEC 60309-1:2021 (All clauses except 29, 30); EN 60309-2:1999 + A1:2007 + A2:2012 (All clauses except 29,30); EN IEC 60309-2:2021 (All clauses except 29, 30); EN 60309-4:2007 + A1:2012 (All clauses except 29, 30); EN IEC 60309-4:2021 (All clauses except 29, 30); EN 62208:2011 (All clauses except 9.5, 9.12, 9.13)
[POW]
EN 60947-1:2007 + A1:2011 + A2:2014 (Accepted clauses 5, 7.1.2.2, 8.3.3.3, 8.3.3.4 (excluded impulse withstand voltage), 8.3.3.6, 8.3.3.7); EN IEC 60947-1:2021 (Accepted clauses 8.1.2.2, 8.1.12 + Annex C, 9.3.3.3, 9.3.3.4 (excluded impulse withstand voltage), 9.3.3.6, 9.3.3.7); EN 60947-3:2009 + A1:2012 + A2:2015 (Accepted clauses 5, 7.1.2.2 Test Sequence II (8.3.4.1, 8.3.4.2, 8.3.4.3, 8.3.4.4), 8.5.1, 8.5.2); EN IEC 60947-3:2021 (Accepted clauses 8.1.2.2, Test Sequence II (9.3.5.2, 9.3.5.3, 9.3.5.4, 9.3.5.5), 9.5.2, 9.5.3)
|
2006-03-16 |
2024-02-16 |
IMQ-062/E-CTF2 Issue No: 2 |
E-CTF-2 |
PERFORMANCE IN LIGHTING S.p.A. |
Viale del Lavoro, 9/11
IT-37030 Colognola ai Colli
Verona (VR) |
Italy |
[LITE]
EN 60598-1:2015 + A1:2018 (All clauses except 4.4.4, 4.13.6, 4.18.2 / Annex F, 4.20, 4.24 / Annex P, 4.26, 4.28, 9.2.3, 10.3.1, 11.2.1); EN IEC 60598-1:2021 + A11:2022 (All clauses except 4.4.4, 4.13.6, 4.18.2 / Annex F, 4.20, 4.24 / Annex P, 4.26, 4.28, 4.34, 4.35, 9.2.3, 9.2.9, 9.2.10, 9.2.11, 10.3.1, 11.2.1); EN 60598-2-1:1989; EN IEC 60598-2-1:2021; EN 60598-2-2:2012; EN 60598-2-3:2003 + A1:2011; EN 60598-2-4:2018; EN 60598-2-5:2015; EN 60598-2-13:2006 + A1:2012 + A2:2016 + A11:2021 (All clauses except 13.6.1, 13.6.2.1, 13.6.2.2); EN IEC 62031:2020 + A11:2021 (All clauses except 4.8, 6.2 g), 12.1, 17, 18, 20, 21, Annex D)
|
2005-04-14 |
2023-11-09 |
IMQ-021/E-CTF2 Issue No: 2 |
E-CTF-2 |
PIZZATO ELETTRICA S.r.l. (Laboratorio Prove P6) |
Corso della Ceramica, 56/B
IT-36063 Marostica
Vicenza (VI) |
Italy |
[POW]
EN 60947-1:2007 + A1:2011 + A2:2014 (All clauses except 8.2.1.1.1, 8.3.4, 8.4.1.2.2, 8.4.1.2.3, 8.4.1.2.6, 8.4.1.2.7, 8.4.2, Annex K - For Annex C (Degrees of protection of enclosed equipment): Applicable clauses 14.2.4, 14.2.5, 14.2.6, 14.2.7, 14.2.8 of EN 60529:1991 + A1:2000 + A2:2013); EN IEC 60947-1:2020 (All clauses except 8.2.1.1.1, 8.3.4, 8.4.1.2.2, 8.4.1.2.3, 8.4.1.2.6, 8.4.1.2.7, 8.4.2 - For Annex C (Degrees of protection of enclosed equipment): Accepted clauses 14.2.4, 14.2.5, 14.2.6, 14.2.7, 14.2.8 of IEC 60529:1989 + A1:1999 + A2:2013 / EN 60529:1991 + A1:2000 + A2:2013; EN 60947-5-1:2004 + A1:2009 (All clauses except 8.3.4); EN 60947-5-1:2017 (All clauses except 8.2.1.1.1, 8.3.4, 8.4.2.1, 8.4.2.2, 8.4.2.5, 8.4.2.6, 8.4.3); EN 60947-5-5:1997 + A1:2005 + A11:2013 + A2:2017 (All clauses except Annex A) |
2020-09-02 |
2024-02-23 |
IMQ-375/E-CTF2 Issue No: 2 |
E-CTF-2 |
RELCO S.r.l. |
Via delle Azalee, 6/A
IT - 20090 Buccinasco (MI) |
Italy |
[LITE]
EN IEC 60598-1:2021 + A11:2022 (Accepted clauses 3, 7, 10.2, 11, 12); EN 60598-2-2:2012 (Accepted clauses 2.6, 2.8, 2.9, 2.13, 2.15); EN 60598-2-3:2003 + A1:2011 (Accepted clauses 3.5, 3.7, 3.8, 3.12, 3.14); EN 60598-2-5:2015 (Accepted clauses 5.5, 5.7, 5.8, 5.12, 5.14); EN 61347-1:2015 + A1:2021 (Accepted clauses 7, 9, 12, 13, 15, 16, 20); EN 61347-2-7:2012 + A1:2019 (All clauses except 8, 9, 11, 14, 15, 16, 17, 18, 19, 20.1, 31, 32, 33, 34.2, 34.5, 35); EN 61347-2-13:2014 + A1:2017 (Accepted clauses 7, 10, 12, 13, 15, 17, 21, Annex J (except J.7, J.8)); EN IEC 62031:2020 + A11:2021 (Accepted clauses 6, 8, 11, 12.2, 14, 15) |
2022-03-25 |
2024-05-22 |
IMQ-416/E-CTF2 Issue No: 2 |
E-CTF-2 |
SCAME PARRE S.p.A. |
Via Campignano, 9
IT-24020 Parre
Bergamo (BG) |
Italy |
[INST]
EN 50085-1:2005 + A1:2013; EN 50085-2-1:2006 + A1:2011; EN 61386-1:2008 + A1:2019; EN 61386-21:2004 + A11:2010; EN IEC 61386-21:2021 + A11:2021; EN 61242:1997 + A1:2008 + A2:2016 + A13:2017; EN 60309-1:1999 + A1:2007 + A2:2012 (All clauses except 20 and 21 (for equipment with rated operating voltage > 400V and rated current > 32A)); EN IEC 60309-1:2022 (All clauses except 20 and 21 (for equipment with rated operating voltage > 400 V and rated current > 32 A)); EN 60309-2:1999 + A1:2007 + A2:2012; EN IEC 60309-2:2022; EN 60309-4:2007 + A1:2012; EN IEC 60309-4:2022; EN 61316:1999; EN IEC 61316:2021; EN 50250:2002 + A1:2015; EN 60669-1:1999 + A1:2002 + A2:2008; EN 60669-1:2018 (All clauses except 19.3); EN 60998-1:2004; EN 60998-2-1:2004; EN 60670-1:2005 + A1:2013; EN IEC 60670-1:2021 + A1:2021; EN 60670-22:2006; EN 60670-24:2013; EN 62208:2011 (All clauses except 9.13); EN IEC 62208:2023 (All clauses except 9.14)
[ELVH]
EN 62196-1:2014 (All clauses except 22, 23 and 31); EN IEC 62196-1:2022 (All clauses except 22, 23, 31); EN 62196-2:2017; EN IEC 62196-2:2022; EN 62196-3:2014 (All clauses except 26.4); EN IEC 62196-3:2022 (All clauses except 26.4)
[POW]
EN 61439-1:2011 (All clauses except 10.2.2); EN 61439-1:2021 (All clauses except 10.2.2); EN 61439-4:2013 (All clauses except 10.2.6.3, 10.2.2.101); EN 60947-1:2007 + A1:2011 + A2:2014 (All clauses except 8.3.3); EN IEC 60947-1:2021 (All clauses except 9.3); EN 60947-3:2009 + A1:2012 + A2:2015 (All clauses except 8.3.3, 8.3.5, 8.3.6); EN IEC 60947-3:2021 (All clauses except 9.3.4, 9.3.6, 9.3.7, 9.3.8, 9.3.9)
|
2005-11-11 |
2024-03-21 |
IMQ-069/E-CTF2 Issue No: 3 |
E-CTF-2 |
SCHNEIDER ELECTRIC INDUSTRIE ITALIA S.p.A. |
Via Govoni, 17
IT-40066 Pieve di Cento
Bologna (BO) |
Italy |
[LITE]
EN IEC 60598-1:2021 + A11:2022 (All clauses except 4.4.4, 4.12.5, 4.13.6, 4.14.3, 4.18.2 / Annex F, 4.20, 4.24 / Annex P, 4.26, 4.28, 4.34, 4.35, 4.36, 9.2.1, 9.2.2, 9.2.5, 9.2.7, 9.2.8, 9.2.9, 9.2.10, 9.2.11, 10.3, 12.5 1e), Annex C Fig. C3); EN IEC 60598-2-1:2021; EN 60598-2-2:2012; EN 60598-2-4:2018; EN 60598-2-22:2014 + A1:2020; EN IEC 60598-2-22:2022; EN 61347-1:2015 + A1:2021 (All clauses except 14.6, 17, 18.2, 19); EN 61347-2-7:2012 + A1:2019 + A2:2022 (All clauses except 4.4.5 of IEC 62034 (prescribed in Annex K)); EN 62262:2002 - IEC TR 62696:2011 |
2006-02-22 |
2024-06-28 |
IMQ-090/E-CTF2 Issue No: 2 |
E-CTF-2 |
SIMES S.p.A. |
Via G. Pastore, 2/4
IT-25040 Nigoline di Corte Franca
Brescia (BS) |
Italy |
[LITE]
EN IEC 60598-1:2021 + A11:2022 (All clauses except 4.4.4, 4.13.6, 4.20, 4.24.1 / Annex P, 4.26, 4.28, 4.34, 4.35, 4.36, 5.2.10.1, 9.2.10, 9.2.11, 13.4.1); EN IEC 60598-2-1:2021; EN 60598-2-2:2012; EN 60598-2-3:2003 + A1:2011; EN 60598-2-4:2018; EN 60598-2-5:2015; EN 60598-2-13:2006 + A1:2012 + A2:2016 + A11:2021; EN 60598-2-18:1994 + A1:2012; EN IEC 62031:2020 + A11:2021 (All clauses except 4.8, 13.1, 18, 20, 21.1/21.3, Annex A, Annex D); IEC/TR 62778:2014
|
2010-01-21 |
2024-04-17 |
IMQ-236/E-CTF2 Issue No: 2 |
E-CTF-1 |
TECNOINOX S.r.l. (Laboratorio TECNOINOX) |
Via Torricelli, 1
IT - 33080 Porcia (PN) |
Italy |
[HOUS]
EN 60335-1:2002 + A11:2004 + A1:2004 + A12:2006 + A2:2006 + A13:2008 + A14:2010 + A15:2011 (All clauses except 8, 14, 15, 19.11.4 (EMP), 22, 25, 26, 27, 28, 30, Annex E, Annex N, Annex T); EN 60335-1:2012 + A11:2014 + A13:2017 (All clauses except 8, 14, 15, 19.11.4 (EMP), 22, 25, 26, 27, 28, 30, Annex E, Annex N); EN 60335-2-48:2003 + A1:2008 + A11:2012 (All clauses ) |
2018-10-05 |
2018-10-05 |
IMQ-344/CTF1 |
E-CTF-2 |
TEKA INDUSTRIAL S.A. (TEKA Laboratory Gas Competence Center) |
Via Alcide De Gasperi, 20
IT-36060 Pianezze San Lorenzo
Vicenza (VI) |
Italy |
[HOUS]
EN 60335-1:2002 + A11:2004 + A1:2004 + A12:2006 + A2:2006 + A13:2008 + A14:2010 + A15:2011 (All clauses except 8, 14, 15.1, 15.3, 19.11.4, 21.2, 22.11, 22.12, 22.16, 25.14, 25.15, 26, 28, 29, 30); EN 60335-1:2012 + A11:2014 + A13:2017 (All clauses except 8, 14, 15.1, 15.3, 19.11.4, 21.2, 22.11, 22.12, 22.16, 25.14, 25.15, 26, 28, 29, 30); EN 60335-2-6:2015 (All clauses except 8, 19.101, 19.102, 21.102, 22.110, 22.111, 22.135, 22.136, 30, 32.101); EN 60335-2-102:2016 (All clauses except 8.101) |
2022-06-13 |
2022-06-13 |
IMQ-418/E-CTF2 Issue No: 0 |
E-CTF-2 |
VIABIZZUNO S.r.l.
(Laboratorio Prove Viabizzuno) |
Via L. Romagnoli, 10
IT-40010 Bentivoglio (BO) |
Italy |
[LITE]
EN 60598-1:2015 + A1:2018 (Accepted clauses: 3.4, 4.11.6, 4.12.1, 4.12.5, 4.13.1, 4.13.3, 4.14, 4.21.4, 4.26, 5.2.10.1, 5.3, 5.4, 7.2.3, 8.2.5, 9.2.0, 10.2.1, 10.2.2, 10.2.3, 11.2.1, 12.3.1, 12.4.1, 12.5.1 e), Annex C Fig. C3, 14, 4.6.3, 4.12); EN IEC 60598-1:2021 + A11:2022 (Accepted clauses: 3.4, 4.11.6, 4.12.1, 4.12.5, 4.13.1, 4.13.3, 4.14, 4.21.4, 4.26, 4.33, 4.36, 5.2.10.1, 5.3, 5.4, 7.2.3, 8.2.5, 9.2.0, 10.2.1, 10.2.2, 10.2.3, 11.2.1, 12.3.1, 12.4.1, 12.5.1 e), Annex C Fig. C3, 14, 4.6.3, 4.12); EN 60598-2-1:1989; EN IEC 60598-2-1:2021; EN 60598-2-2:2012; EN 60598-2-4:2018; EN 60598-2-13:2006 + A1:2012 + A2:2016 + A11:2021 (Accepted clauses: 13.5, 13.6.4, 13.6.5, 13.7, 13.8, 13.9, 13.10, 13.11, 13.12, 13.14, 13.15); EN IEC 62031:2020 + A11:2021 (Accepted clauses: 6.6, 7, 8, 9, 11, 12, 15, 16); EN 61347-1:2015 + A1:2021 (Accepted clauses: 7.2, 10, 12, 14 (excl. 14.7), 16, L.6, L.7); EN 61347-2-11:2001 + A1:2019 (Accepted clauses: 7, 8, 12, 14, 16 (only d.c. supplied miscellaneous electronic circuits used with luminaires up to 48 Vd.c.); EN 61347-2-13:2014 + A1:2017 (Accepted clauses: 7, 8, 12, 14, 15, 17 (only d.c. supplied controlgear up to 48 Vd.c.) |
2020-09-25 |
2023-11-09 |
IMQ-379/E-CTF2 Issue No: 1 |
E-CTF-2 |
VIMAR S.p.A. [Prod. Cat.: INST - PROT] |
Via IV Novembre, 32
IT-36063 Marostica
Vicenza (VI) |
Italy |
[INST]
EN 61242:1997 + A1:2008 + A2:2016 + A13:2017 (All clauses except 25.2); EN 60669-1:1999 + A1:2002 + A2:2008 (All clauses except 24.2); EN 60669-1:2018 (All clauses except 24.2); EN 60669-2-1:2004 + A1:2009 + A12:2010 (All clauses except 24.2, 26); EN IEC 60669-2-1:2022 + A11:2022 (All clauses except 24.2, 26, 103); EN 60669-2-5:2016 (All clauses except 24.2, 26); EN 60670-1:2005 + A1:2013 (All clauses except 19); EN IEC 60670-1:2021 + A11:2021 (All clauses except 19); EN 60670-22:2006 (All clauses except 19); EN 60670-24:2013 (All clauses except 19)
|
2005-12-05 |
2024-02-16 |
IMQ-084/E-CTF2 Issue No: 1 |
E-CTF-3 |
CANDY HOOVER GROUP S.r.l. (Cooking & Built-in Lab) |
Via Comolli, 16
IT-20861 Brugherio
Monza-Brianza (MB) |
Italy |
[HOUS]
EN 60335-1:2012 + A11:2014 + A13:2017 + A1:2019 + A14:2019 + A2:2019 + A15:2021 (All clauses except 14, from 19.11.4.1 to 19.11.4.7); EN 60335-2-6:2015 + A1:2020 + A11:2020 (All clauses except 22.110, 22.111, 22.135, 22.136, 22.137, 32.101); EN 60335-2-102:2016 (All clauses except 8.101)
|
2021-12-01 |
2024-01-30 |
IMQ-403/E-CTF3 Issue No: 1 |
E-CTF-2 |
DE’ LONGHI APPLIANCES S.r.l. (Laboratorio MCM (Macchine Caffè Manuali)) |
Via Lodovico Seitz, 47
IT-31100 Treviso
Treviso (TV) |
Italy |
[HOUS]
EN 60335-1:2012 + A11:2014 + A13:2017 + A1:2019 + A14:2019 + A2:2019 + A15:2021 + A16:2023 (All clauses except 14, 15.1, 19.11.4 (EMP), 22.32, 22.48, Annex N, Annex R, Annex T); EN 60335-2-14:2006 + A1:2008 + A11:2012 + A12:2016; EN IEC 60335-2-14:2023 + A11:2023 + A1:2023 (All clauses except 22.104); EN 60335-2-15:2016 + A11:2018 + A12:2021 + A1:2021 + A2:2021
|
2022-02-10 |
2024-06-05 |
IMQ-408/E-CTF2 Issue No: 2 |
E-CTF-2 |
ARTEMIDE S.p.A. (ARTEMIDE LABORATORY) |
Via Bergamo, 17
IT - 20006 Pregnana Milanese (MI) |
Italy |
[LITE]
EN 60598-1:2015 + A1:2018 (All clauses except 4.13.6, 4.20, 4.24 / Annex P, 4.28, 9.2.1, 9.2.2, 9.2.3, 9.2.4, 9.2.5, 9.2.6, 9.2.7, 9.2.8, 9.2.9, 9.2.10, 12.5.1e Annex C Fig. C3, 13.3.1, 13.4.1); EN IEC 60598-1:2021 + A11:2022 (All clauses except 4.13.6, 4.20, 4.24 / Annex P, 4.28, 4.34, 4.35, 9.2.1, 9.2.2, 9.2.3, 9.2.4, 9.2.5, 9.2.6, 9.2.7, 9.2.8, 9.2.9, 9.2.10, 9.2.11, 12.5.1e Annex C Fig. C3, 13.3.1, 13.4.1); EN IEC 60598-2-1:2021; EN 60598-2-2:2012; EN 60598-2-3:2003 + A1:2011; EN 60598-2-4:2018; EN 60598-2-5:2015; EN 60598-2-13:2006 + A1:2012 + A2:2016 + A11:2021 (All clauses except 13.6.1, 13.6.2.1, 13.6.2.2); EN IEC 60598-2-22:2022 (All clauses except 22.13, 22.17.1 Annex C, 22.19); EN IEC 60598-2-23:2021; EN IEC 62031:2020 + A11:2021 (All clauses except 12.1, 18, 21); EN 61347-1:2015 + A1:2021 (Accepted clause 14 except 14.7); EN 61347-2-11:2001 + A1:2019 (Accepted clause 14); EN 61347-2-13:2014 + A1:2017 (Accepted clause 14) |
2023-05-10 |
2023-05-10 |
IMQ-428/E-CTF2 Issue No: 0 |
E-CTF-2 |
ELECTROLUX PROFESSIONAL S.p.A. (Electrolux Professional Laboratory) [452] |
Viale Treviso, 15
IT-33170 Pordenone (PN) |
Italy |
[HOUS]Hot Laboratory:
EN 60335-1:2002 + A11:2004 + A1:2004 + A12:2006 + A2:2006 + A13:2008 + A14:2010 + A15:2011 (All clauses except 14, 15, 19.11.4 (EMP), 21.2, 22.48, 29.2.1, 30.1, 30.2, Annex E, Annex F, Annex G, Annex H, Annex K, Annex N, Annex R, Annex T); EN 60335-1:2012 + A11:2014 + A13:2017 + A1:2019 + A14:2019 + A2:2019 + A15:2021 (All clauses except 14, 15, 19.11.4 (EMP), 21.2, 22.48, 29.2.1, 30.1, 30.2, Annex E, Annex F, Annex G, Annex H, Annex K, Annex N, Annex R, Annex T); EN IEC 60335-1:2023 (All clauses except 14, 15, 19.11.4 (EMP), 21.2, 22.48, 29.2.1, 30.1, 30.2, Annex E, Annex F, Annex G, Annex H, Annex K, Annex N, Annex R, Annex T); EN 60335-2-6:2015 + A1:2020 + A11:2020 (All clauses except 22.110, 22.111, 30,
32.101); EN 60335-2-36:2002 + A1:2004 + A2:2008 + A11:2012; EN 60335-2-38:2003 + A1:2008; EN 60335-2-39:2003 + A1:2004 + A2:2008; EN 60335-2-42:2003 + A1:2008 + A11:2012; EN 60335-2-50:2003 + A1:2008; EN 60335-2-64:2000 + A1:2002; EN 60335-2-90:2006 + A1:2010; EN 60335-2-102:2016 (All clauses except 8.101).
[HOUS] Refrigeration Laboratory:
EN 60335-1:2012 + A11:2014 + A13:2017 + A1:2019 + A14:2019 + A2:2019 + A15:2021 (All clauses except 14, 15, 19.11.4 (EMP), 21.2, 22.48, 29.2.1, 30.1, 30.2, Annex N, Annex T); EN 60335-2-89:2010 + A1:2016 + A2:2017 (All clauses except 15.102, 22.103, 22.104, 22.106, 22.107, 22.108); EN 60335-2-89:2022 + A11:2022 (All clauses except 15.102, 22.103, 22.104, 22.106, 22.107, 22.108).
|
2024-02-13 |
2024-02-13 |
IMQ-452/E-CTF2 Issue No: 0 |
E-CTF-2 |
ZOBELE HOLDING S.p.A. (Electrical Testing Laboratory) |
Via Fersina, 4
IT - 38123 Trento (TN) |
Italy |
[HOUS]
EN 60335-1:2012 + A11:2014 + A13:2017 + A1:2019 + A14:2019 + A2:2019 + A15:2021 + A16:2023 (All clauses except 14, 15.1, 19.11.4 (EMP), 22.32, 25.14, 27.5); EN 60335-2-101:2002 + A1:2008 + A2:2014
|
2024-05-06 |
2024-05-06 |
IMQ-457/E-CTF2 Issue No: 0 |
E-CTF-2 |
VORTICE S.p.A. (Laboratorio Prove R&D) [458] |
Strada Cerca, 2 - Frazione Zoate
I-20067 Tribiano (MI) |
Italy |
[HOUS]
EN 60335-1:2002 + A11:2004 + A1:2004 + A12:2006 + A2:2006 + A13:2008 + A14:2010 + A15:2011 (All clauses except 14, 19.11.4 (EMP), 22.48); EN 60335-1:2012 + A11:2014 + A13:2017 + A1:2019 + A14:2019 + A2:2019 + A15:2021 + A16:2023 (All clauses except 14, 19.11.4 (EMP), 22.48, Annex R; Annex T, Annex U); EN 60335-2-30:2009 + A11:2012 + A1:2020 + A12:2020 + A13:2022 + A2:2022 (All clauses except 22.7); EN 60335-2-80:2003 + A1:2004 + A2:2009 (All clauses except 20.101) |
2024-05-16 |
2024-05-16 |
IMQ-458/E-CTF2 Issue No: 0 |
E-CTF-2 |
THERMOWATT S.p.A. (LABORATORIO THERMOWATT ARCEVIA ELETTROMECCANICA) |
Via San Giovanni Battista, 21
IT-60011 Arcevia (AN) |
Italy |
[CONT]
EN 60730-1:2011 (All clauses except 12.1, 18, 21.2.1 to 21.2.4, 21.2.7, 23, 26, Annexes C-E-H-J-P-Q-R-U); EN 60730-1:2016 + A1:2019 + A2:2022 (All clauses except 12.1, 18, 21.2.1 to 21.2.4, 21.2.7, 23, 26, Annexes C-E-H-J-P-Q-R-U); EN IEC 60730-2-9:2019 + A1:2019 + A2:2020 (All clauses except 12.1, 18, 21.2.1 to 21.2.4, 21.2.7, 23, 26, Annexes C-E-H-J-P-Q-R-U-DD) |
2022-11-22 |
2024-06-26 |
IMQ-421/E-CTF2 Issue No: 1 |
E-CTF-2 |
BONFERRARO S.p.A. (Laboratorio R&D) [462] |
Via Oberdan, 57
Bonferraro di Sorgà
IT- 37060
Verona (VR) |
Italy |
[HOUS]
EN 60335-1:2012 + A11:2014 + A13:2017 + A1:2019 + A14:2019 + A2:2019 + A15:2021 + A16:2023 (All clauses except 14, 19.11.4 (EMP), Annex R; Annex T); EN IEC 60335-1:2023 + A11:2023 (All clauses except 12, 14, 19.11.4 (EMP), 22.48, Annex R, Annex T, Annex U); EN 60335-2-5:2015 + A11:2019 + A1:2020; EN 60335-2-7:2023 + A11:2023; EN 60335-2-11:2022 + A11:2022
|
2024-05-23 |
2024-05-23 |
IMQ-462/E-CTF2 Issue No: 0 |